How Can New York City Construction Workers Avoid Osha’s Fatal Four Hazards?

Numerous construction workers, foremen, and property owners are aware that construction is a hazardous occupation. The Occupational Safety and Health Administration (OSHA) regulates industry safety, establishes best safety practises for construction sites, and collects data on construction-related accidents and injuries.

OSHA’s Fatal Four Construction Hazards

The site foreman ensures that all workers and visitors wear the proper protective equipment and that hazardous areas or live wires are appropriately marked or sectioned off.

It is also the responsibility of each worker to pay close attention while performing their duties and to adhere to all applicable safety regulations. Negligence and irresponsibility can result in serious and often fatal accidents.

Construction workers face a very real risk of falling from heights. The construction of structures dozens of feet in the air involves inherent danger. The construction company is responsible for providing you with safe, functional, and secure harnesses, scaffolding, and other safety equipment in the event that you fall while working above the ground.

This equipment should be routinely inspected for damage or wear that could make it unsafe, but it’s best to inspect it before you leave the ground.

If you are working at a height with others, always communicate clearly if you are moving around or behind someone to avoid knocking them over by accident.

A struck-by accident occurs when an object collides with a person. This object could be a beam or post that is swinging or a falling object from scaffolding that has struck a person below. Flying debris or flying objects, such as concrete fragments from jackhammering or a stray nail from a nail gun, would also be considered a struck-by accident.

Your hard hat is your best defence against a concussion or traumatic brain injury caused by a struck-by accident. Ensure that all of your equipment and tools are secured and placed safely on your scaffolding if you are working above ground.

Do not attempt to construct your own “equipment holder” to hold supplies, and move carefully so as not to knock anything off.

On a construction site, these accidents may be among the most terrifying. They occur when a worker is caught between two objects and can result in crushing injuries or amputations.

Operating heavy machinery, such as compressors and forklifts, may present a caught-between hazard. All heavy equipment should have an emergency stop that must be regularly inspected and tested to ensure its functionality.

Always ensure that you are not wearing any loose clothing or equipment that could become entangled and pin you. If you or someone else is caught between objects, stop all machinery and wait for emergency services to arrive. They understand how to extract individuals with minimal nerve or spine damage.

Electrocution can occur if wires are strewn about or if equipment is defective. All electrical equipment must be routinely inspected and cleaned. If you are working near exposed wiring, you should always assume it is hot and refrain from touching it.

Place appropriate safety signs around your work area to alert others if you are working on the wiring. Always inspect cords before plugging in electrical equipment, and take care not to overload outlets.

Protect Yourself from the Fatal Four Work Hazards With Caution

If you are injured on a construction site through no fault of your own, you may be able to pursue a claim for compensation for your injuries and suffering. A construction accident attorney can be of assistance.

Contact Our Personal Injury Law Firm

Contact Abrams Law Group for a free consultation if you’ve been hurt in an accident and require legal assistance.

Abrams Law Group
104-70 Queens Boulevard, Suite 502
Forest Hills, NY 11375
(718) 997-9797

Follow us on Instagram and Twitter for settlement updates

Leave a Comment

Your email address will not be published.

Scroll to Top